Download
Catalogue
Video
Reference
EWcG Products and Services
Swiss Cord
Ski Lift Swiss Cord
This model is a low profile lift with a low rope guidance. The re-feeding of the support cord is approximately 3.7m height above the site. The SunKid Swisscord is used for different applications such as beginner-lifts, logistical or shuttle services solutions in ski areas.A 16 mm polyamide rope with welded rubber grips is used as haul rope.
The gearboxes of the drive- and outstations are built into almost enclosed boxes; height can be adjusted mechanically to 2.8 m on a vertical square pole. This enables the simple adjustment of the tow rope to the current snow conditions on the route.
Technical specification
- variable height adjustment by motor
- Adjustment to kind of passengers (children or adults)
- Adjustment to snow height
- Easy grooming through variable height (lift up of rope up to 3,7m) - motor power 5,5 to 11kW (7.5 to 15 PS) depending on length and inclination
- ATLAS polyamide fiber rope with rubber-grips
- max. transport length 300m
- max. grade for beginner 15%, commuter lift up to 20%
- variable speed by frequency-converter from 0 - 2,0 m/sec
- portable and pluggable e-box
- folded stopgabe at the bottom and top station
- drive station top or ground (at choice)
- weight:
- drive station approx. 1.200kg (2,650 lbs)
- return station approx. 1.000kg (2,200 lbs) - minimum height 3,7m
- entrance/exit both sides possible
- motor-driven height adjustment of both stations for max. 2,8 m
- set up on foundation plates
- permition without supervision possible
- capacity: up to 720 people per hour
